LINKSYS 3102 CONFIGURACION DE 3 EQUIPO A UNA CENTRAL

[anonymous]

Buenas si alguien me puede ayudar. He configurado 3 linksys 3102 como puertos trunks

10000
10001
10002

En las reglas de salida le puse como
primera ruta 10000
segunda ruta 10001
tercera ruta 10000

funciona la primera ruta si problemas, el tema esta cuando esta ocupado se sopone que salta a la siguiente ruta 2 y 3 a veces toma la linea a vece no hay q insistir. Igual llaman a ese anexo, y el otro extremo quieren llamar sale como ocupado pongo los log a ver si dan una ayuda, el gateway 252 esta desactivado dado que estoy probando otra forma.



12:00:29.069 [CM506001]: STUN request to resolve SIP external IPort mapping is sent to STUN server 69.0.208.27:3478 over Transport 192.168.106.15:5060

11:59:49.353 [CM503008]: Call(1210): Call is terminated

11:59:49.353 [CM503008]: Call(1210): Call is terminated

11:59:45.316 [CM504001]: Ext.1210: new contact is registered. Contact(s): [sip:[email protected]:5060/1210]

11:59:36.271 [CM504001]: Ext.1211: new contact is registered. Contact(s): [sip:[email protected]:5061/1211]

11:58:23.363 [CM504008]: Fax Service: registered as sip:[email protected]:5060 with contact sip:[email protected]:5100;user=phone

11:57:35.400 [CM504001]: Ext.1500: new contact is registered. Contact(s): [sip:[email protected]:5060/1500]

11:55:42.949 [CM503007]: Call(1210): Device joined: sip:[email protected]:5061

11:55:42.949 [CM503007]: Call(1210): Device joined: sip:[email protected]:5061

11:55:42.902 [CM505002]: Gateway:[289] Device info: Device Identified: [Man: Linksys;Mod: SPA Series;Rev: General] Capabilities:[reinvite, no-replaces, able-no-sdp, recvonly] UserAgent: [Linksys/SPA3102-5.1.5(GWa)] Transport: [sip:192.168.106.15:5060]

11:55:42.902 [CM503002]: Call(1210): Alerting sip:[email protected]:5061

11:55:42.808 [CM503004]: Call(1210): Route 3: PSTNline:9@(Ln.10001@253)@[Dev:sip:[email protected]:5062]

11:55:42.808 [CM503004]: Call(1210): Route 2: PSTNline:9@(Ln.10002@252)@[Dev:sip:[email protected]:5063]

11:55:42.808 [CM503024]: Call(1210): Calling PSTNline:9@(Ln.10000@289)@[Dev:sip:[email protected]:5061]

11:55:42.792 [CM503004]: Call(1210): Route 1: PSTNline:9@(Ln.10000@289)@[Dev:sip:[email protected]:5061]

11:55:42.698 [CM503010]: Making route(s) to

11:55:42.698 [CM505001]: Ext.1226: Device info: Device Identified: [Man: Linksys;Mod: SPA Series;Rev: General] Capabilities:[reinvite, no-replaces, able-no-sdp, recvonly] UserAgent: [Linksys/SPA2002-3.1.20(o)] Transport: [sip:192.168.106.15:5060]

11:55:42.683 [CM503001]: Call(1210): Incoming call from Ext.1226 to

11:53:23.832 [CM504001]: Ext.1225: new contact is registered. Contact(s): [sip:[email protected]:5060/1225]

11:53:22.642 [CM504008]: Fax Service: registered as sip:[email protected]:5060 with contact sip:[email protected]:5100;user=phone

11:53:22.642 [CM504001]: Ext.1226: new contact is registered. Contact(s): [sip:[email protected]:5061/1226]

11:52:49.123 [CM503008]: Call(1196): Call is terminated

11:52:49.123 [CM503008]: Call(1196): Call is terminated

11:52:13.068 [CM504001]: Ext.1228: new contact is registered. Contact(s): [sip:[email protected]:5060/1228]

11:51:24.604 [CM504001]: Ext.1224: new contact is registered. Contact(s): [sip:[email protected]:5061/1224]

11:51:24.542 [CM504001]: Ext.1410: new contact is registered. Contact(s): [sip:[email protected]:5060/1410]

11:48:21.953 [CM504008]: Fax Service: registered as sip:[email protected]:5060 with contact sip:[email protected]:5100;user=phone

11:47:03.380 [CM503008]: Call(1209): Call is terminated

11:46:59.891 [CM503004]: Call(1209): Route 3: PSTNline:9@(Ln.10001@253)@[Dev:sip:[email protected]:5062]

11:46:59.891 [CM503024]: Call(1209): Calling PSTNline:9@(Ln.10002@252)@[Dev:sip:[email protected]:5063]

11:46:59.875 [CM503004]: Call(1209): Route 2: PSTNline:9@(Ln.10002@252)@[Dev:sip:[email protected]:5063]

11:46:59.875 [CM503016]: Call(1209): Target is not registered: PSTNline:9 dialed on (AnyLine@289)

11:46:59.875 [CM303003]: There are no available outbound lines on gateway 289 at this time.

11:46:59.797 [CM503010]: Making route(s) to

11:46:59.750 [CM505001]: Ext.1226: Device info: Device Identified: [Man: Linksys;Mod: SPA Series;Rev: General] Capabilities:[reinvite, no-replaces, able-no-sdp, recvonly] UserAgent: [Linksys/SPA2002-3.1.20(o)] Transport: [sip:192.168.106.15:5060]

11:46:59.734 [CM503001]: Call(1209): Incoming call from Ext.1226 to

11:46:56.323 [CM503008]: Call(1208): Call is terminated

11:46:38.499 [CM503004]: Call(1208): Route 3: PSTNline:9@(Ln.10001@253)@[Dev:sip:[email protected]:5062]

11:46:38.499 [CM503024]: Call(1208): Calling PSTNline:9@(Ln.10002@252)@[Dev:sip:[email protected]:5063]

11:46:38.483 [CM503004]: Call(1208): Route 2: PSTNline:9@(Ln.10002@252)@[Dev:sip:[email protected]:5063]

11:46:38.483 [CM503016]: Call(1208): Target is not registered: PSTNline:9 dialed on (AnyLine@289)

11:46:38.483 [CM303003]: There are no available outbound lines on gateway 289 at this time.

11:46:38.405 [CM503010]: Making route(s) to

11:46:38.374 [CM505001]: Ext.1226: Device info: Device Identified: [Man: Linksys;Mod: SPA Series;Rev: General] Capabilities:[reinvite, no-replaces, able-no-sdp, recvonly] UserAgent: [Linksys/SPA2002-3.1.20(o)] Transport: [sip:192.168.106.15:5060]

11:46:38.358 [CM503001]: Call(1208): Incoming call from Ext.1226 to

11:44:58.801 [CM503008]: Call(1207): Call is terminated

11:44:58.754 [CM503015]: Call(1207): Attempt to reach failed. Reason: Server Failure

11:44:58.754 [CM503003]: Call(1207): Call to sip:[email protected]:5062 has failed; Cause: 503 Service Unavailable; from IP:192.168.106.23:5062

11:44:58.754 [CM505002]: Gateway:[253] Device info: Device Identified: [Man: Linksys;Mod: SPA Series;Rev: General] Capabilities:[reinvite, no-replaces, able-no-sdp, recvonly] UserAgent: [Linksys/SPA3102-5.1.10(GW)] Transport: [sip:192.168.106.15:5060]

11:44:58.754 [CM503002]: Call(1207): Alerting sip:[email protected]:5062

11:44:58.551 [CM503024]: Call(1207): Calling PSTNline:116@(Ln.10001@253)@[Dev:sip:[email protected]:5062]

11:44:58.551 [CM503003]: Call(1207): Call to sip:[email protected]:5063 has failed; Cause: 503 Service Unavailable; warning: ; internal

11:44:57.424 Couldn't TLS connect

11:44:57.424 Error may be because trying ssl connection to tls server

11:44:57.424 (SSL Error want syscall)

11:44:57.424 TLS connection failed ok=-1 err=5 error:00000005:lib(0):func(0)H lib

11:44:57.268 [CM503004]: Call(1207): Route 3: PSTNline:116@(Ln.10001@253)@[Dev:sip:[email protected]:5062]

11:44:57.268 [CM503024]: Call(1207): Calling PSTNline:116@(Ln.10002@252)@[Dev:sip:[email protected]:5063]

11:44:57.236 [CM503004]: Call(1207): Route 2: PSTNline:116@(Ln.10002@252)@[Dev:sip:[email protected]:5063]

11:44:57.236 [CM503016]: Call(1207): Target is not registered: PSTNline:116 dialed on (AnyLine@289)

11:44:57.236 [CM303003]: There are no available outbound lines on gateway 289 at this time.

11:44:57.158 [CM503010]: Making route(s) to

11:44:57.127 [CM505001]: Ext.1210: Device info: Device Identified: [Man: Linksys;Mod: SPA Series;Rev: General] Capabilities:[reinvite, no-replaces, able-no-sdp, recvonly] UserAgent: [Linksys/SPA2002-3.1.20(o)] Transport: [sip:192.168.106.15:5060]

11:44:57.111 [CM503001]: Call(1207): Incoming call from Ext.1210 to

11:44:37.988 [CM503008]: Call(1205): Call is terminated

11:44:37.973 [CM503015]: Call(1205): Attempt to reach failed. Reason: Server Failure

11:44:37.973 [CM503003]: Call(1205): Call to sip:[email protected]:5062 has failed; Cause: 503 Service Unavailable; from IP:192.168.106.23:5062

11:44:37.894 [CM503024]: Call(1205): Calling PSTNline:9@(Ln.10001@253)@[Dev:sip:[email protected]:5062]

11:44:37.879 [CM503003]: Call(1205): Call to sip:[email protected]:5063 has failed; Cause: 503 Service Unavailable; warning: ; internal

11:44:37.065 [CM503008]: Call(1206): Call is terminated

11:44:37.034 [CM503015]: Call(1206): Attempt to reach failed. Reason: Server Failure

11:44:37.034 [CM503003]: Call(1206): Call to sip:[email protected]:5062 has failed; Cause: 503 Service Unavailable; from IP:192.168.106.23:5062

11:44:36.940 [CM503024]: Call(1206): Calling PSTNline:116@(Ln.10001@253)@[Dev:sip:[email protected]:5062]

11:44:36.924 [CM503004]: Call(1206): Route 3: PSTNline:116@(Ln.10001@253)@[Dev:sip:[email protected]:5062]

11:44:36.924 [CM503016]: Call(1206): Target is not registered: PSTNline:116 dialed on (AnyLine@252)

11:44:36.924 [CM303003]: There are no available outbound lines on gateway 252 at this time.

11:44:36.924 [CM503016]: Call(1206): Target is not registered: PSTNline:116 dialed on (AnyLine@289)

11:44:36.924 [CM303003]: There are no available outbound lines on gateway 289 at this time.

11:44:36.846 [CM503010]: Making route(s) to

11:44:36.846 [CM505001]: Ext.1210: Device info: Device Identified: [Man: Linksys;Mod: SPA Series;Rev: General] Capabilities:[reinvite, no-replaces, able-no-sdp, recvonly] UserAgent: [Linksys/SPA2002-3.1.20(o)] Transport: [sip:192.168.106.15:5060]

11:44:36.799 [CM503001]: Call(1206): Incoming call from Ext.1210 to

11:44:36.564 [CM503004]: Call(1205): Route 3: PSTNline:9@(Ln.10001@253)@[Dev:sip:[email protected]:5062]

11:44:36.564 [CM503024]: Call(1205): Calling PSTNline:9@(Ln.10002@252)@[Dev:sip:[email protected]:5063]

11:44:36.549 [CM503004]: Call(1205): Route 2: PSTNline:9@(Ln.10002@252)@[Dev:sip:[email protected]:5063]

11:44:36.549 [CM503016]: Call(1205): Target is not registered: PSTNline:9 dialed on (AnyLine@289)

11:44:36.549 [CM303003]: There are no available outbound lines on gateway 289 at this time.

11:44:36.486 [CM503010]: Making route(s) to

11:44:36.439 [CM505001]: Ext.1226: Device info: Device Identified: [Man: Linksys;Mod: SPA Series;Rev: General] Capabilities:[reinvite, no-replaces, able-no-sdp, recvonly] UserAgent: [Linksys/SPA2002-3.1.20(o)] Transport: [sip:192.168.106.15:5060]

11:44:36.392 [CM503001]: Call(1205): Incoming call from Ext.1226 to

11:44:32.777 [CM503008]: Call(1203): Call is terminated

11:44:27.848 [CM503008]: Call(1204): Call is terminated

11:44:27.817 [CM503015]: Call(1204): Attempt to reach failed. Reason: Server Failure

11:44:27.817 [CM503003]: Call(1204): Call to sip:[email protected]:5062 has failed; Cause: 503 Service Unavailable; from IP:192.168.106.23:5062

11:44:27.770 [CM503024]: Call(1204): Calling PSTNline:120@(Ln.10001@253)@[Dev:sip:[email protected]:5062]

11:44:27.738 [CM503004]: Call(1204): Route 3: PSTNline:120@(Ln.10001@253)@[Dev:sip:[email protected]:5062]

11:44:27.738 [CM503016]: Call(1204): Target is not registered: PSTNline:120 dialed on (AnyLine@252)

11:44:27.738 [CM303003]: There are no available outbound lines on gateway 252 at this time.

11:44:27.738 [CM503016]: Call(1204): Target is not registered: PSTNline:120 dialed on (AnyLine@289)

11:44:27.738 [CM303003]: There are no available outbound lines on gateway 289 at this time.

 

[hanllenicolas]

Ceo seria mejor tener una regla de salida distinta para cada uno de los dispositivos, son 3 gateways en este caso, asi que serian 3 reglas distintas para tomar cada una de esas lineas y evitarte el incoveniente. pondrias para linea 10000 - uno, para 10001 - dos y asi respectivamente. bastante engorroso, pero son 3 dispositivos distintos.


Saludos.